CK01-DM | CK01 | SR78
   
CK01-DM
CK01
SR78
BUCK01
BUCK01-DM
BUCK02
BUCK02-DM
DUCKxx-DM
UA0345-050S,C,L
UA1030-350C,CI
UA1750-350L
ACF-01
ACF-02
ACF-03
BOOST01
 
 
 
High Power High Voltage Constant Current LED Driver Dimmable
Total Power ----------------------- 48 Watts max
Input voltages --------------------- 30 ~ 70 VDC
 
MODEL:CK01-xxxxDM
MODEL NO. DC INPUT
Voltage (V)
OUTPUT (LED) Efficiency
Max
%
Watts
Max
(W)
Voltage (V) Current (mA)
Min Max Min Max Typ
CK01-350DM 30 50 28 Vin - 0.8 350 ± 10% 97 17
CK01-350HDM 50 70 48 Vin - 0.8 350 ± 10% 97 24
CK01-700DM 30 42 28 Vin - 0.8 700 ± 10% 97 28
CK01-700HDM 42 52 40 Vin - 0.8 700 ± 10% 97 35
CK01-1000DM 30 42 28 Vin - 0.8 1000 ± 10% 97 40
CK01-1000HDM 42 50 40 Vin - 0.8 1000 ± 10% 97 48
 
SPECIAL FEATURES:
Output short circuit protection
High efficiency reduce total power consumption
Tight regulated constant current output to maximize the LED performance
Wide range of input voltage from 30 ~ 70 VDC
Wide selection of pre-adjusted C/C outputs
 
ENVIRONMENTAL:
Operating temperature ----------------------------- - 40℃ to + 65℃
Storage temperature -------------------------------- - 40℃ to + 85℃
Humidity (Non – Condensing) ------------------ 5% to 95%
Cooling ----------------------------------------------- Convention
Vibration Frequency -------------------------------- 5 to 50 HZ
 
Dimension :
(TOP VIEW) (BOTTOM VIEW)
  Note:
1.All dimensions are in millimeters.
2.All dimensions without tolerances are for reference only.
 
Application Example : Synopsis:
MODEL NO LED Q'TY

CK01-350DM

6 ~ 12

CK01-350HDM

12 ~ 17

CK01-700DM

6 ~ 10

CK01-700HDM

10 ~ 12

CK01-1000DM

6 ~ 10

CK01-1000HDM

10 ~12

 
External Pulse /Strobe Control :
Figures show a method for low speed pulsing or high speed flashing operation.And a TTL/CMOS logic signal is applied directly to the dimmer(DIM) input of the CK01-xxxDM. The output current will be zero when the control signal is low. Note that the input needs to source a minimum of 4.75Vdc into a 1K ohm input impedance. Also, as is the case with a dc control signal ,the logic input ground should to be common to GND.
 
 
Ehome Technology Co., Ltd. ADD: No.24, Alley 5, Lane 289, Sec.2, Chin Hua Rd., Tainan, Taiwan, R.O.C.
TEL:886-6-2656759 FAX:886-6-2636759 Email: ehome.tek@msa.hinet.net